Hello,
new on the forum and I have a question. My hand plane blades are sharpened at 25 degrees. In the workshop I give it a micro bevel of 30 degrees (by hand, not with the Tormek). After a while I need to put a new bevel on it (25 degrees). I do this with my Tormek T8 (normal stone).
A small Lee Nielson block plane blade took me more then 1,5 hours tonight. I tried everything; grinding the stone again (taking a bit of the stone with the jig), and making it coarse again and again with the grinding stone.
Really frustrating. So I could use some useful tips on this issue.
Thanks a lot in advance.
Rob
new on the forum and I have a question. My hand plane blades are sharpened at 25 degrees. In the workshop I give it a micro bevel of 30 degrees (by hand, not with the Tormek). After a while I need to put a new bevel on it (25 degrees). I do this with my Tormek T8 (normal stone).
A small Lee Nielson block plane blade took me more then 1,5 hours tonight. I tried everything; grinding the stone again (taking a bit of the stone with the jig), and making it coarse again and again with the grinding stone.
Really frustrating. So I could use some useful tips on this issue.
Thanks a lot in advance.
Rob