Moin,
another newbie with a T4 here.
First of all many thanks for this great tool! When I first heard about the Android app I thought this was screaming for an Excel implementation and considered figuring out the math myself. But I would never have gotten it that nice and complete.
Anyway I used TormekCalc2 with these values instead of the WM-200 on the sixth knife I ever sharpened and am proud to say that this gave my best edge so far.
Hajo
another newbie with a T4 here.
First of all many thanks for this great tool! When I first heard about the Android app I thought this was screaming for an Excel implementation and considered figuring out the math myself. But I would never have gotten it that nice and complete.
Quotejvh kindly responded: "From some older notes I have: VH=66 HH=29 HV=50 VV=20. (I didn't double check... so do some testing to verify).I tried to measure my T4 with a digital slide gauge and came up with VH = 67, HH = 29, HV= 49 and VV= 20. The off by 1mm could well be attributed to my sloppy measurement.
Anyway I used TormekCalc2 with these values instead of the WM-200 on the sixth knife I ever sharpened and am proud to say that this gave my best edge so far.
Hajo