Hello, I have bought a T-1. Unfortunately, I'm not getting good results with it. I have a professionally sharpened knife that is no longer sharp. The grinding angle was 20 degrees. As indicated in the enclosed operating instructions, I set the T-1 to ~17.5 degrees and pressed the blade slightly downwards in the guide (with the machine running). As shown in the video, I moved one side of the blade back and forth several times with light pressure. This should be done until a burr appears on the opposite side of the blade; then the other side of the blade should be processed in the same way. My problem: There is no burr and the sharpening result is mediocre at best. Any thoughts?
Thank you
Thomas
Thank you
Thomas