New to forum and woodworking, plus using Clarkes 8" wet wheel grinder Tormek unaffordable,, Aaaaah shame!, not all at once please.
ikely wrong place but here goes.
I recently purchased a Tormek Angle master wm-200 and it has two angle sales one above the other , The lower scale is 10-75° and upper scale mb-100 0-55°.
I am using the lower scale ready to sharpening both chisels and a plane blade.angle seems right. No YouTube demo video or instructions on box refer to top scale.
Curiosity has the better of me what top scale is for. I think Have the right forum name.
Thanks in advance :D
Quote from: numpty on September 21, 2020, 02:30:25 PM
New to forum and woodworking, plus using Clarkes 8" wet wheel grinder Tormek unaffordable,, Aaaaah shame!, not all at once please.
ikely wrong place but here goes.
I recently purchased a Tormek Angle master wm-200 and it has two angle sales one above the other , The lower scale is 10-75° and upper scale mb-100 0-55°.
I am using the lower scale ready to sharpening both chisels and a plane blade.angle seems right. No YouTube demo video or instructions on box refer to top scale.
Curiosity has the better of me what top scale is for. I think Have the right forum name.
Thanks in advance :D
It's for setting the angle using the MB-100 (https://www.tormek.com/international/en/accessories/other-accessories/mb-100-multi-base/)... which is used to sharpen on the flat side of the diamond wheel.
You can read about it here.... https://www.tormek.com/media/1911662/hb-10-en-v104-mb-100.pdf