Print Page - Supergrind 2000 start-up direction

Title: Supergrind 2000 start-up direction
Post by: Lumberjack on September 07, 2004, 08:58:13 PM

I have a 92-93 supergrind 2000 that when switched on will sometimes start in the correct direction and sometimes in the "wrong" direction. It sometimes won't turn at all requiring a slight "nudge in the correct direction to get it going.
Anyone else experience this? Not sure if it's the starter capacitor or if it's an internal problem.
Thanks,
Lumberjack

Title: Re:Supergrind 2000 start-up direction
Post by: Jeff Farris on September 18, 2004, 01:47:55 PM

Sounds like you need to change the starting capacitor. Call us.

Title: Re: Supergrind 2000 start-up direction
Post by: GOFG woodworking on August 05, 2024, 06:34:54 PM

I have the same problem. I discovered that the start capacitor had actually ruptured. I'm going to replace it.
Grumpy old fat guy

Title: Re: Supergrind 2000 start-up direction
Post by: Ken S on August 05, 2024, 10:36:00 PM

GOFG,

As a fellow grumpy old fart, I like your forum name.

I suspect the problem is your capacitor. However, to be more certain, I suggest you email support with a description for expert advice. (support@tormek.se)

Ken

Tormek Community Forum

In the Shop => General Tormek Questions => Topic started by: Lumberjack on September 07, 2004, 08:58:13 PM