Print Page - TORMEK T-1 (wrong voltage)

Title: TORMEK T-1 (wrong voltage)
Post by: TZero on August 11, 2026, 02:29:03 PM

Hello Team,

I recently received one as a gift, but I live in Brazil, where the standard voltage in my region is 110V, and the unit I received is configured for 220V.

I would like to know:

Is there an internal switch or any official modification procedure that can be done (by opening the machine) to safely switch it from 220V to 110V?

Thank you for your time and assistance.

Best regards,

Title: Re: TORMEK T-1 (wrong voltage)
Post by: Ken S on August 12, 2026, 02:50:33 AM

Welcome to theforum, TZero. Email Tormek support ([email protected]). They will help you.

Ken

Title: Re: TORMEK T-1 (wrong voltage)
Post by: John Hancock Sr on August 14, 2026, 09:06:09 AM

I believe that the motors are voltage specific. I bought a voltage transformer from AliExpress for about AU$25. They are pretty low current devices so it does not require a high power rating.

Tormek Community Forum

In the Shop => General Tormek Questions => Topic started by: TZero on August 11, 2026, 02:29:03 PM