Hi,
Running into problem of not being able to jig sharpen daggers, seems this may work. Anybody doing this?
I should clarify, meaning large daggers, roughly 6-10" blades.
I do my pocket knives by hand. It takes practice but I get really good results.
Another option:
https://forum.tormek.com/index.php/topic,5751.msg42186.html#msg42186
I've used the small knife holder to sharpen knives (even large knives) which do not clamp well on the blade, like this Spyderco with a full flat grind and a distal taper. It works well. Just make sure your blade's edge is perfectly in line with the centerline of the jig, otherwise you'll get a wider bevel on one side.
However very long blades might be challenging because your support is not near the midpoint of the blade.
(https://i.postimg.cc/FF3b2sJ1/IMG-1696.jpg) (https://postimg.cc/s1fZWzmR)