I bet this must be out there somewhere but can't find the thread, sorry. The t8 handbook gives examples for spindle gouges for 30 and 45 degree bevels and shows the 3-step recipe (hole, protrusion, 186 setting). I'd like to re-grind a SG via my BGM-100's/grinder from 30 to 35 degree bevel before transferring over for final sharpening on my t8 but can't understand whether to use hole A or B on the TTS-100 as it's not mentioned in the handbook. Hope I've explained myself OK here or am I missing something! Anyone able to help with this, please?
Dave,
Here is more details: https://sharpeninghandbook.info/WW-SpindleGouge.html
Rich
Thanks Rich ... will try this.