Hello,
Ive had the KS 123 for a few months now, It seemed to be working great initially however now I find when i go to adjust the angle the device seems "stiff" in a way. As in I keep turning the micro adjuster and the the angle doesn't move then jumps up in degrees if I let go then reapply pressure to the holding points on the wheel. Im not sure if something on the angle setter is overly tight or maybe im not dong it right? Setting the protrusion doesn't seem to be an issue.
I have looked at the how to's etc and it seems Im following the right steps. should the arrow that points to the degrees move relatively freely or have some resistance.
Any help on this would be great.
Thank you.
Jon
Quote from: Jevans on Today at 04:36:03 AMif I let go then reapply pressure to the holding points on the wheel.
I hold the three arms to the wheel as I adjust. I think that is how you are supposed to use it.