Print Page - universal jig

Title: universal jig
Post by: k1um on September 09, 2008, 10:41:52 AM

Hi all.. Just got a T7
Universal jig works great except on my Baily block plane blades... the blade is thin and doesnt get clamped down enough to lock the blade in... seems tlo be a gap in the device.. Suggestions? is the jig out of alignment or a miss casting??

Thanks
Ken

Title: Re: universal jig
Post by: k1um on September 11, 2008, 09:00:59 PM

I ment to ay the "Square Edge Jig" not the universal jig
Sorry

Title: Re: universal jig
Post by: Jeff Farris on September 15, 2008, 01:03:29 AM

Try bringing down both sides of the clamp evenly. I'll take a look tomorrow, but I think the clamp should be able to hold very thin blades with no problem.

Tormek Community Forum

In the Shop => General Tormek Questions => Topic started by: k1um on September 09, 2008, 10:41:52 AM