Text only | Text with Images

Tormek Community Forum

In the Shop => General Tormek Questions => Topic started by: mbarber on April 21, 2025, 09:31:13 PM

Title: USED (new to me) Tormek SuperGrind 2000
Post by: mbarber on April 21, 2025, 09:31:13 PM
Just picked up a Tormek SuperGrind 2000. It is missing three of the four Rubber Feet. Item #18 on the spare parts list. Any suggestions where I might source this item?

Also, any suggestions on type of lubricant to use on the main shaft? Manual discusses re-greasing but does not stipulate type.

And, yes, before using I'm reading the manual.
Title: Re: USED (new to me) Tormek SuperGrind 2000
Post by: Ken S on April 21, 2025, 10:09:25 PM
Welcome to the forum, Michael.

I suggest that you email support. (support@tormek.se) for your parts request.

A small tube of white lithium grease works very well for the shaft.

Ken
Title: Re: USED (new to me) Tormek SuperGrind 2000
Post by: John Hancock Sr on April 22, 2025, 02:38:33 AM
Quote from: Ken S on April 21, 2025, 10:09:25 PMA small tube of white lithium grease works very well for the shaft.

You should be able to source one at your local automotive store.
Title: Re: USED (new to me) Tormek SuperGrind 2000
Post by: mbarber on April 22, 2025, 02:28:37 PM
Thank you for the replies. Will send email to support@tormek.se.
Title: Re: USED (new to me) Tormek SuperGrind 2000
Post by: mbarber on April 24, 2025, 09:11:29 PM
Support - Cammie in IL responded. Tormek is sending replacement feet at no cost. Thank you for the suggestion.
Text only | Text with Images