Print Page - Sharpening drill bits

Title: Sharpening drill bits
Post by: Bestarius on July 28, 2008, 04:33:09 PM

I know the Tormek stone is too soft to sharpen a carbide bit. However, it seems that sharpening regular bits is not recommended. I'm curious as to why this is so?

Title: Re:Sharpening drill bits
Post by: Jeff Farris on July 28, 2008, 07:47:01 PM

It is not that the stone is not recommended for twist drills, it is that there is no jig available for the job.

Tormek Community Forum

In the Shop => General Tormek Questions => Topic started by: Bestarius on July 28, 2008, 04:33:09 PM