This honing wheel is inspired from T1 and T2
1.jpg
It's a complement to your T8 when you honing larger knives by hand and don't want to remove the grinding wheel or angle the knife so it doesn't collide with the grinding wheel when honing. So now I have a T82
I mostly honing knives by hand and have been missing a conical honing leather wheel for my T8. I have asked Håkan at Tormek if they have any plans to produce a conical leather wheel for the T8, but he said that they had not intended to do that. So I thought it was time to get one of my own and here it is now. I have already made a prototype that I used for a while with positive experiences from it so I know it works well.
The wheel is printed on my 3D printer and the center washer in steel I borrowed from an extra LA-220 that I had lying around.
I am attaching the STL file if any of you want to make your own. Could be a nice little summer hobby on vacation!
A leather strap has been cut from part of a cow that was decent enough to offer me a piece. The leather strap is glued with a Casco contact adhesive for leather and attached you see all the measurements you need to cut out the right dimension of the band. A tip: print on paper first as a template so you can try it to fit how you want.
2.jpg
31.jpg
Yes, that's what we need if we don't want to remove the stone every time.
Now we have to wait for a producer who sees a profit in it.
It's strange that Tormek thinks otherwise.
Nice !
Maybe with a "spaceship-type" contraption, we could do controlled honing on such a wheel.
It's weird that Tormek sees the need for this with the T1/2 but not the T4/8.
Hello, Perra!
Nice one, thanks for the idea. Now I use standard small Tormek honing wheels to work with serrations, but will consider to build more versatile wheel as yours.
Per,
Clever, clever, clever!!! I can see your design being used with both leather and composite. Hopefully Tormek will see the potential, also. Half the machining is already done with their present leather honing wheel.
Incidentally, the tapered composite honing wheel for the T1/2 is also an exact fit for the T4.
Well done, Per!
Ken