If you want to work with an angle cube to set grinding angles, this little simple tool "zeroing plate" might be helpful.
No mathematical formulas or programs are needed, nor measurement of usb height.
I think this topic has been up in the forum before but I don't think I've seen this method.
As a result of working with the "Black edition" protractor, some ideas emerged that have resulted in, for example, this small tool.
It's almost the same principle as the Knife Angle Setter, three points on the wheel, but instead of a graduated scale I use a Digital Angle Cube.
Pic1.jpg
Pic2.jpg
It consists of four parts that are easy to 3-d print if you have access to a 3d printer, of course.
And one of them is of course my favorite The T-Cube.
The simple zeroing plate works well directly with the SE-77 and with the T-cube the knife jigs also work well, such as KJ-45 and KJ-140.
Of course, you have to do the procedure a few times as I described in the pdf file because the zero position moves when you adjust the usb support,
but it goes very quickly and is a very simple procedure. I feel that you quite quickly find a good way to work with setting the right angle.
I've included a description with images, text and links to parts in the attached PDF file for anyone who might want to try making one of their own.
It is free to download and 3d-print and use as you wish.
Use the Zip file further down the thread
Right now this is my favorite method for setting angles quickly when sharpening knives. And I am completely satisfied with the accuracy and think it is good enough for my requirements.
Hope someone finds it interesting and wants to try it. You are welcome to return with comments if you 3d-print your own copy and test it. Or if you have other views or ideas on the topic.
Don't forget to give a "plåster" to your customers in case they need to feel how sharp the knife became after your work.
Very interesting approach. Thank you for sharing your method and all the well documented details including the print files. I know how much work it takes getting to that.
Perra, this is brilliant !
All STL-files for 3D-printing
STL-files.zip
This is how I placed the parts in Cura for best printing results
Placed in cura.jpg
Thank you.
I will try printing this at our local libraries marketplace where they have an excellent 3D printer for patrons.
Quote from: Perra on March 20, 2024, 03:17:35 PMIf you want to work with an angle cube to set grinding angles, this little simple tool "zeroing plate" might be helpful.
No mathematical formulas or programs are needed, nor measurement of usb height.
I think this topic has been up in the forum before but I don't think I've seen this method.
As a result of working with the "Black edition" protractor, some ideas emerged that have resulted in, for example, this small tool.
It's almost the same principle as the Knife Angle Setter, three points on the wheel, but instead of a graduated scale I use a Digital Angle Cube.
... SNIP...
It consists of four parts that are easy to 3-d print if you have access to a 3d printer, of course.
And one of them is of course my favorite The T-Cube.
The simple zeroing plate works well directly with the SE-77 and with the T-cube the knife jigs also work well, such as KJ-45 and KJ-140.
Of course, you have to do the procedure a few times as I described in the pdf file because the zero position moves when you adjust the usb support,
... SNIP...
Don't forget to give a "plåster" to your customers in case they need to feel how sharp the knife became after your work.
Wow that's brilliant!
Önskar att jag hade kommit på det bara..
Nice. Sent of to my local 3D print shop (AKA my son)
I've made one of these and, as usual, Per's design is excellent.