Text only | Text with Images

Tormek Community Forum

In the Shop => General Tormek Questions => Topic started by: ealbers on June 16, 2008, 08:26:02 PM

Title: Sharpening Carbide?
Post by: ealbers on June 16, 2008, 08:26:02 PM
Can the Tormek system sharpen carbide tips?

Title: Re:Sharpening Carbide?
Post by: Jeff Farris on June 17, 2008, 01:22:10 PM
In September we will be introducing a new grindstone (SB-250) designed for faster stock removal on HSS and exotic alloys.  It will touch up carbide, but is not adequate for shaping or serious nick removal. The standard SG-250 is not suitable for carbide at all.
Text only | Text with Images