I want to use a wheel hook similar to TS-740 with a Husky/Seville/HomeDepot bench or cabinet. Something like wall plate with baby stud in photo lighting:
(https://www.bhphotovideo.com/cdn-cgi/image/format=auto,fit=scale-down,width=500,quality=95/https://www.bhphotovideo.com/images/images500x500/impact_srp_115p_3_baby_pin_wall_1493285908_1305586.jpg)
Anyone have any ideas what we will be a good candidate for this DIY?
Thank you.
Use a bolt like this https://www.mcmaster.com/91247A558/ (https://www.mcmaster.com/91247A558/), and saw off the head.
I like the bolt shown, although I prefer to grind off just enough for the head of the bolt to easily clear the bore of the grinding wheel. That leaves a shoulder to help keep the grinding wheel in place.
It's a good illustration, although any good local store should carry the bolts, nuts, washers, etc.
Ken