In the Shop => General Tormek Questions => Topic started by: briandavies on February 14, 2007, 08:39:14 PM
Title: turning cutters
Post by: briandavies on February 14, 2007, 08:39:14 PM
Hi I use my tormek for sharpening woodturning and wood working tools and was wondering could i use the tormek to take a very slight chip out of a metel turning cutter thanks
Title: Re:turning cutters
Post by: Jeff Farris on February 15, 2007, 04:24:54 AM
As long as it is not carbide, it should cut it fine.