Tormek Community Forum

In the Shop => General Tormek Questions => Topic started by: Ken S on May 06, 2020, 03:17:23 AM

Title: online video class thoughts
Post by: Ken S on May 06, 2020, 03:17:23 AM

I have been very pleased with Tormek's new online classes. Over the years, I have become a convert to the benefits of video learning. Among the benefits of video compared to traditional classrooms is the ability to view several times, thus deepening understanding. Another benefit is cost effectiveness. I am not privy to facts and figures, however, I can not imagine making an instructional video being anywhere the cost of transportation, hotel, meals, and salary of sending a crew to a show. A show could easily give brief exposure to perhaps a thousand potential customers. Who knows how many customers and users can benefit from a well done video.

I think of these videos like a baseball strategy of hitting lots of reliable singles and a few doubles instead of trying to make a few home runs. Lots of suggestions to fine tune technique and correct bad habits. An example of this is using the stone grader placed parallel to the grinding wheel instead of perpendicular. This makes the wear on the stone grader more even and helps to keep the grinding wheel true.

I hope this will help spark discussion about the many "singles" learned from the online video classes.

Ken
Title: Re: online video class thoughts
Post by: Ken S on May 06, 2020, 01:48:06 PM
The online classes are planned to be conducted in four lamguages, English, German, French, and Swedish. I agree with Jan that it is always better to here things in one's native language. I expect each of the presentations to have minor variations, in large part due to the question and answer portions. While presenting a challenge, this also provides an opportunity for our forum structure.

We have multilingual forum members. Most of the class content will be essentially identical. If each of our multilingual members would focus on one or two of the differences and post a summary of these bite size portions, we could all benefit from all of the programs. It would help to include the time on the class video. That way, members not fluent in that language could read both the summary translation and watch the pertinent part of the video. When we include forum discussion, we will have a powerful set of learning tools.

Ken
Title: Re: online video class thoughts
Post by: Tool Junkie on May 14, 2020, 11:56:29 PM
Quote from: Ken S on May 06, 2020, 03:17:23 AM
An example of this is using the stone grader placed parallel to the grinding wheel instead of perpendicular. This makes the wear on the stone grader more even and helps to keep the grinding wheel true.

Ken

Ken,
I found it interesting to note that they showed placing the stone grader in this position in the 1st video class, but when I checked the video series, the old one showed holding it at a right angle to the wheel. It seems that techniques have been changed or improved, just like their jigs have.
Title: Re: online video class thoughts
Post by: Ken S on May 15, 2020, 01:29:05 AM
Good point, ToolJunkie. I agree.However, not everyone seems to have gotten the message or just prefers the crosswise method. I don't think there is a wrong method; just that the parallel stone grader method seems more logical.

Yes, I do believe that the techniques, like the jigs, have evolved over the years. I am pleased to see this evolving technique becoming global. I hope these new videos are just the first of many and that Tormek has realized the cost effectiveness of home grown videos.

Ken

Title: Re: online video class thoughts
Post by: John_B on May 15, 2020, 03:21:26 PM
I think the presentations are improving with each one. This last one had a great flow and it was fun to watch them do each type of knife. Having everything prestaged helps with the flow as they are not interrupted by going to the drawer for a jig. A lot of information was packed into an hour.

I was especially pleased to see how they tackled the hook knife at the end.
Title: Re: online video class thoughts
Post by: Ken S on May 15, 2020, 09:42:09 PM
John, I agree. The classes do seem to be getting better.
Ken
Title: Re: online video class thoughts
Post by: Tool Junkie on June 04, 2020, 03:28:24 AM
For those of you that don't know, there is another class in the morning. 6:30 Pacific Coast Time zone. Gardening tools?
Title: Re: online video class thoughts
Post by: John_B on June 04, 2020, 04:40:28 AM
8:30 here in the Midwest.

I am up at 5 so time for the dogs, coffee and the news before class.
Title: Re: online video class thoughts
Post by: Ken S on June 04, 2020, 02:55:05 PM
9:30 here in the Eastern Frontier of the Midwest (Ohio).

As an insomniac, being up at 4:30 gives me time for coffee and watching the economy collapse three times with the you tube experts before the class......

Ken
Title: Re: online video class thoughts
Post by: Segovia123 on July 13, 2020, 12:27:28 PM
Where can I find the online classes?

Are they available?

Regards

J
Title: Re: online video class thoughts
Post by: RichColvin on July 13, 2020, 12:35:55 PM
John,

I cataloged them at the bottom of this page http://sharpeninghandbook.info/indexBooksVideosWebSites.html

Kind regards,
Rich