Print Page - T8 Diamond wheel

Title: T8 Diamond wheel
Post by: danquinn on October 18, 2019, 02:01:34 PM

Hi all

Has anyone else had issues with the diamond coating on the new diamond wheels when grinding on the side of the wheel. I am sharpening chisels with a flat bevel on the diamond fine wheel using the mb-100 and am starting to see lines around the wheel where the diamond is removed...

Thanks I'm advance

Dan

Title: Re: T8 Diamond wheel
Post by: Ken S on October 18, 2019, 02:21:30 PM

Welcome to the forum, Dan.

I have not read any other posts about this issue. I suggest you contact support (support@tormek.se).
Please keep us posted.

Ken

Title: Re: T8 Diamond wheel
Post by: danquinn on October 18, 2019, 02:51:46 PM

Email sent, thanks Ken... I'll keep you posted 👍

Title: Re: T8 Diamond wheel
Post by: Ken S on October 18, 2019, 03:45:13 PM

Well done, Dan.

I email support frequently. I have found support very helpful.

Ken

Tormek Community Forum

In the Shop => General Tormek Questions => Topic started by: danquinn on October 18, 2019, 02:01:34 PM