I need several stopper for Knife jig(11.8mm) and Universal support(12.1mm). I want to be able to use a single bolt as shown in the picture. Can anyone know the name of this?
I can't get it in Korea and I want to buy it in the US. I don't know what size to buy.
Thank you.
Youngbin,
It is a collar. All types are available. I get mine from McMaster Carr. Here is their listing :
https://www.mcmaster.com/#shaft-collars/=1csjhg3
I buy 12mm for all, but probably need someone else to give more details on that.
Rich
Quote from: RichColvin on May 11, 2018, 11:40:28 AM
Youngbin,
It is a collar. All types are available. I get mine from McMaster Carr. Here is their listing :
https://www.mcmaster.com/#shaft-collars/=1csjhg3
I buy 12mm for all, but probably need someone else to give more details on that.
Rich
Thank you Rich.
I could find what I wanted with your help.
Quote from: SHARPCO on May 11, 2018, 08:08:58 AM
I need several stopper for Knife jig(11.8mm) and Universal support(12.1mm). I want to be able to use a single bolt as shown in the picture. Can anyone know the name of this?
I can't get it in Korea and I want to buy it in the US. I don't know what size to buy.
Thank you.
Rich is right on both points.... Mcmaster-Carr and 12mm.
Specifically, I have used this one...
https://www.mcmaster.com/#57485k69/=1cslf2c (https://www.mcmaster.com/#57485k69/=1cslf2c)
... it fits on both the USB & Knife Jig. (Don't know if it's the best, haven't tried any others, but it has worked for me).
What are you making?
I have used the same type, thanks to CB, but in stainless for my Pin Pivot Clamp Collars.
https://www.mcmaster.com/#9616t21/=1csniwj
I have about 10 available as of yesterday ($40 plus shipping).
Rick
Quote from: cbwx34 on May 11, 2018, 02:15:28 PM
Quote from: SHARPCO on May 11, 2018, 08:08:58 AM
I need several stopper for Knife jig(11.8mm) and Universal support(12.1mm). I want to be able to use a single bolt as shown in the picture. Can anyone know the name of this?
I can't get it in Korea and I want to buy it in the US. I don't know what size to buy.
Thank you.
Rich is right on both points.... Mcmaster-Carr and 12mm.
Specifically, I have used this one...
https://www.mcmaster.com/#57485k69/=1cslf2c (https://www.mcmaster.com/#57485k69/=1cslf2c)
... it fits on both the USB & Knife Jig. (Don't know if it's the best, haven't tried any others, but it has worked for me).
What are you making?
I'll get this.
https://www.ruland.com/MCL-12-SS.html
Sharpco,
The stop ring from your square edge jig might be a good substitute. Here is a link to the part number:
https://advanced-machinery.myshopify.com/products/1091-stop-ring
The locking screw has a standard 6mm metric thread. You should be able to find a variety of screws for it.
I confess that I do not use the stops on either end when using the square edge jig, however, the stop collar can be useful for different things.
Ken
Quote from: Ken S on May 12, 2018, 02:51:06 PM
Sharpco,
The stop ring from your square edge jig might be a good substitute. Here is a link to the part number:
https://advanced-machinery.myshopify.com/products/1091-stop-ring
The locking screw has a standard 6mm metric thread. You should be able to find a variety of screws for it.
I confess that I do not use the stops on either end when using the square edge jig, however, the stop collar can be useful for different things.
Ken
Good idea!