Newbie Here, First Post,
Just recently received a T8 and several jigs. I will be doing primarily drill bits and knives. Watched the videos and reading the manual and everything else I can find. Came across references to a "Grinding Angle Adjustment booklet" and that it is posted on the forum. I've been searching for where it is posted so I can download it. Can't find it, so I'm asking for help.
Thanks,
Rick
Quote from: RickKrung on August 25, 2017, 01:28:35 AM
Newbie Here, First Post,
Just recently received a T8 and several jigs. I will be doing primarily drill bits and knives. Watched the videos and reading the manual and everything else I can find. Came across references to a "Grinding Angle Adjustment booklet" and that it is posted on the forum. I've been searching for where it is posted so I can download it. Can't find it, so I'm asking for help.
Thanks,
Rick
Welcome to the forum.
I created a page with some links I found useful in the forum (pertaining to knife sharpening)... you'll find it here... http://wp.me/P93bLq-g.
A link to the booklet is about half way down... but you can also find it in the thread that explains it here... https://forum.tormek.com/index.php?topic=1849.0.
Enjoy!
Welcome to the forum, Rick. I highly recommend that you download and/or print out Ton's booklet. (I did both.) It is the basis for the kenjig and related jigs.
Ken