New 'Blog' post... proofreaders welcome! 8)
Sharpening Your First Knife on the Tormek Using the SVM-45 Knife Jig (https://tormekknifesharpening.wordpress.com/sharpening-your-first-knife-using-a-jig)
Well done, CB.
You have ecplained knife sharpening accurately. In my opinion, sharpening one's first knife with the Tormek should be preceeded by some experience sharpening a 3/4" (19mm) Irwin or Marples blue chip bench chisel. (See the first topic "tips and techniques" for a more in depth discussion of this.) The flat, large, single bevel of the bench chisel is the simplist edge I know of. The square edge jig is secured to the universal support. This facilitates learning the feel and sound of Tormek grinding.
Keep up the good work!
Ken
Quote from: Ken S on August 24, 2017, 11:55:53 AM
Well done, CB.
You have ecplained knife sharpening accurately. In my opinion, sharpening one's first knife with the Tormek should be preceeded by some experience sharpening a 3/4" (19mm) Irwin or Marples blue chip bench chisel. (See the first topic "tips and techniques" for a more in depth discussion of this.) The flat, large, single bevel of the bench chisel is the simplist edge I know of. The square edge jig is secured to the universal support. This facilitates learning the feel and sound of Tormek grinding.
Keep up the good work!
Ken
Thanks.
I read the topic you referenced. I don't disagree that sharpening a chisel would be a good learning experience, and a good idea to start, but for someone who gets a Tormek mainly to sharpen knives... they will probably start with a knife... my experience anyway.
I will probably add a few notes on "setup"... since, for example, I learned the hard way, it's possible to "over oil" the honing wheel. :'( ... as well as a few things to watch out for... like overgrinding the heel area.
Thanks again.
CB,
I use the 3/4" Irwin Blue Chip chisels only for training and testing. A new Tormek owner is certainly free to start with whatever he wishes. Regardless of one's specialty, I believe a chisel is the most basic edge and should, in my opinion, should be the first learning tool. It is good training for Tormek fundamentals.
Ken
Quote from: Ken S on August 24, 2017, 05:05:49 PM
CB,
I use the 3/4" Irwin Blue Chip chisels only for training and testing. A new Tormek owner is certainly free to start with whatever he wishes. Regardless of one's specialty, I believe a chisel is the most basic edge and should, in my opinion, should be the first learning tool. It is good training for Tormek fundamentals.
Ken
"To sharpen a knife, you must first sharpen a chisel"... does have sort of a zen "vibe" to it. :)
(Or, should I say... a "ken vibe" to it...) ;)
Clever turn of phrase, CB.
Ken
Quote from: Ken S on August 24, 2017, 11:55:53 AM
Well done, CB.
You have ecplained knife sharpening accurately. In my opinion, sharpening one's first knife with the Tormek should be preceeded by some experience sharpening a 3/4" (19mm) Irwin or Marples blue chip bench chisel. (See the first topic "tips and techniques" for a more in depth discussion of this.) The flat, large, single bevel of the bench chisel is the simplist edge I know of. The square edge jig is secured to the universal support. This facilitates learning the feel and sound of Tormek grinding.
Keep up the good work!
Ken
Going to disagree, as not everyone's needs are the same. My restaurant friends, certainly wouldn't have a use for a chisel in the restaurant, but would have knives to practice on.
If you have limited use of the machine, best to practice on what you need it for.