The question has come up about using a foot switch with a Tormek. The specific application was to allow both hands to hold the back of a chisel against the side of the wheel during starting and stopping the motor.
A foot switch interrupts power to the Tormek. The new safety switch is designed to prevent the Tormek from unintentionally starting after a power failure. I believe this switch is mandated by the European board of safety standards. So, while the newer switch is safer, it is perhaps somewhat less convenient in this case.
Ken
I suppose you could replace the electronic switch with the older mechanical switch:
http://www.sharptoolsusa.com/xcart/product.php?productid=195&cat=9
Another option would be to bypass the electronic switch altogether by hard-wiring your foot switch in parallel.
Replacing the switch would certainly be a possibility. However, would it be the best course of action? It would probably void the warranty and violate European safety standards. I believe the wiser course is to pursue other options in flattening chisel backs. That's why i use flat stones or abrasive paper on glass.
Ken
That would work, too. Or you could do both if you have a really rough surface. Start on the Tormek and then move to bench stones. I'm sure that you didn't throw away your bench stones when you bought your first Tormek. :)
Reminds me of that commercial for a self-adjusting wrench where they claim you can throw away all your other wrenches. One of the carpenters on the crew announced that he had stopped on the way to work that morning and thrown his toolbox full of wrenches in the ditch.
Mine is the older 2000 model. Pretty sure that a switched outlet would work.
Try running the machine and unplugging the cord. (switch left on) Plug the cord back in. if the motor is still on, the foot switch should work. Good luck.
Ken
From the sharptoolsusa website: for the 2000 and T-7 (all 10-inch systems)
6061 Rocker Switch Serial #s below 514458
6330 Electronic Switch Serial #s 514458 and up
I will post back tomorrow. Been a long day and tomorrow should be longer. Mainly got on tonight, trying to find a commercial a friend of mine is in.
Mine is the old style. Makes me wonder about an old sewing machine pedal, or making my own switched outlet (larger switch).
As I recall, my air foot switch was around thirty dollars. All you need is something to allow you to keep both hands on the tool and the tool against the wheel at startup and shut down. That lessens the chance of rounding the back. The air switch is a safe option. One poster has his son turn the switch on and off. As long as you don't have to rent a child, that's an inexpensive option.
Ken