Print Page - Which jig(s)?

Title: Which jig(s)?
Post by: richinva on December 11, 2005, 05:29:21 AM

Which jigs to use with which tools?

1/8" and 1/4" spindle gouges, 1/8" parting tool, 1/4" round nose scraper, and 1/4" skew chisel. Also my 3/4" roughing gouge.

Do I need two different jigs?

Thanks.

Rich

Title: Re:Which jig(s)?
Post by: Jeff Farris on December 11, 2005, 02:52:47 PM

1/8" and 1/4" Spindle Gouge = SVS-50 for a straight grind or the SVD-185 for a fingernail grind.

1/8" parting tool, 1/4" skew, and 3/4" roughing gouge = SVS-50

round nose scraper = SVD-110

Title: Re:Which jig(s)?
Post by: richinva on December 12, 2005, 10:24:50 AM

Jeff,

Thanks for the reply. You should be seeing an order at your website.

Merry Christmas!!

Rich

Tormek Community Forum

In the Shop => Wood Turning => Topic started by: richinva on December 11, 2005, 05:29:21 AM