Tormek Community Forum

In the Shop => Knife Sharpening => Topic started by: That Sharpening Guy on June 16, 2014, 08:52:23 PM

Title: Cant figure out how to sharpen a Tanto Blade
Post by: That Sharpening Guy on June 16, 2014, 08:52:23 PM
I cant figure out how to sharpen a tanto blade. Is there any video out there that demonstrates how to do this on the tormek?? Please help!!

Thanks!!
Title: Re: Cant figure out how to sharpen a Tanto Blade
Post by: Rob on June 16, 2014, 09:51:19 PM
You'll be wanting Herman to give you the solution to that one.  He'll be along presently.  He has gone some considerable distance in understanding and developing systems to sharpen short bladed knives.
Title: Re: Cant figure out how to sharpen a Tanto Blade
Post by: Herman Trivilino on June 17, 2014, 01:19:31 AM
Small knives can be sharpened with the new SVM-00:

http://tormek.com/international/en/grinding-jigs/svm-00-small-knife-holder/

It requires that you also have the SVM-45 knife jig.

You can also fashion a homemade jig like I did here:

http://forum.tormek.com/index.php?topic=1592.msg6634#msg6634
Title: Re: Cant figure out how to sharpen a Tanto Blade
Post by: jeff.irick65 on November 21, 2014, 02:24:25 AM
Has anyone tried the SVS-50 on a tanto blade?
Title: Re: Cant figure out how to sharpen a Tanto Blade
Post by: grepper on November 21, 2014, 02:45:42 AM
What is giving you difficulty?  The tip?  Got a picture of it?
Title: Re: Cant figure out how to sharpen a Tanto Blade
Post by: Stickan on November 21, 2014, 08:25:26 AM
Hi,
I am meeting a guy next week who sells those knifes. I will get back to you with a suggestion on how to do it, I've done it some time ago and I know I used 2 jigs but not witch two :-)
Tanto knives has different angles out from the knife-blade and can be tricky. Using SVS-50 will need the blade to rest on its bevel and I would not do that.
Next Friday I will know!

Have a nice weekend!
Stig
Title: Re: Cant figure out how to sharpen a Tanto Blade
Post by: Stickan on December 01, 2014, 10:36:08 AM
Hi,
I got 2 new EKA tactical knifes with Tanto blades to learn how to sharpen this kind of knives and after trying both SVS-50 and SE-76 I figured out that on these specific knifes, the blade is to short to get the right protrusion so I ended up using the SVM-45 knife jig.
First I sharpened the smaller edge/tanto edge at both sides and clamped the jig parallel to the edge and close to the edge.
Then I sharpened the blade edge and got a perfect result after trying it 2 times. I was paying attention so I got the meeting point at the edges to get really good and I I got it 100% correct.
So, You can sharpen it with the SVM-45 but you need to clamp it twice and check the angle twice.
However, there are some Tanto knifes on the market with slightly curved edges and I have not tried sharpening those but I cant see no reason that there will be a problem with getting a good result on them as well.

Stig