In the Shop => General Tormek Questions => Topic started by: PapaDoc on July 20, 2005, 11:45:43 PM
Title: What about Draw Knives?
Post by: PapaDoc on July 20, 2005, 11:45:43 PM
What is the best method for sharpening drawknives? David
Title: Re:What about Draw Knives?
Post by: Jeff Farris on July 21, 2005, 03:53:09 PM
As shown on page 121 of the Owner's Handbook, drawknives are sharpened with the regular knife jig (SVM-45) with the Universal Tool Support in the horizontal position.