I just purchased a good draw knife in a flea market. Any suggestions on sharpening on the Tormek. How about in flattening the back. I know to use the large knife jig, but I was wondering if anyone had any tips. Thank you very much for your time and help!
What kind of shape is the edge in? I would flatten the back on the side of the grindstone, but only if needed. Unless the edge is in really bad shape I would freehand with the grindstone moving away from me. Dress the stone with the fine side of the grader.
I inherited a good Greenlee that wasn't in terrible shape but had to be cleaned up and sharpened. For the back, I decided to do the bulk of it with sandpaper on a granite plate, and I would recommend that approach. I used the long knife jig for the bevel and that worked well, though as usual, take your time and check your progress often. I finished both the back and the bevel on waterstones, then honed on the Tormek strop.