Text only | Text with Images

Tormek Community Forum

In the Shop => General Tormek Questions => Topic started by: tom k on June 11, 2012, 02:01:37 AM

Title: Hello
Post by: tom k on June 11, 2012, 02:01:37 AM
Bought a Supergrind 1200 yesterday will be looking for advice on how to get the best from it 8)

Regards Tom...NW Kent UK
Title: Re: Hello
Post by: Mike Fairleigh on June 11, 2012, 06:50:55 AM
Welcome Tom!
Title: Re: Hello
Post by: Ken S on June 14, 2012, 02:23:33 AM
Welcome, Tom.

Be sure to watch the videos on sharptoolsusa.com.  Jeff, our moderator, does an excellent job of explaining how to get up and running.

Next, my standard (and by now probably boring to the rest of the forum) advice:  Start with a very simple tool like a mid size chisel, about 3/5"(correction 3/4") or 18 mm.  Exact size is not important.  Practice on it until you are starting to feel fluent and confident.

Best of luck, and keep us posted.

Ken
Text only | Text with Images