Print Page - Sharping a draw shave

Title: Sharping a draw shave
Post by: jrg1950 on January 03, 2011, 12:58:11 PM

I tried to sharpen my draw shave on my T-7, but the hone wheel was in the way of the handle. The handle can't be removed. Do you have any suggestions, or have I found something that I can't sharpen on my T-7?

Title: Re: Sharping a draw shave
Post by: Jeff Farris on January 03, 2011, 03:16:10 PM

On the T-7, you can remove the honing wheel without affecting the function of the machine (not true on the T-3). Take the honing wheel off and see if you gain enough clearance.

Title: Re: Sharping a draw shave
Post by: jrg1950 on January 03, 2011, 05:23:47 PM

Hi Jeff
I already tried removing the hone wheel, and still didn't have enough clearance.

Thanks jrg1950

Tormek Community Forum

In the Shop => General Tormek Questions => Topic started by: jrg1950 on January 03, 2011, 12:58:11 PM