Recent posts

#1

General Tormek Questions / Re: US-103 & US-105 difference...

Last post by tgbto - Today at 11:42:11 AM

If you ever intend to sharpen knives, at least anything beyond short knives, I think a US-430 is well worth the price difference.

#2

General Tormek Questions / Re: US-103 & US-105 difference...

Last post by Swemek - Today at 11:38:34 AM

I found this:

I have found several uses for the universal support bars not directly mentioned in the handbook. My support bars are not limited to the standard issue US-105 (T7/8) or US-103(T3/4, 10mm shorter than the US-105).

In some swedish shops the US-103 costs more than 105 which doesn't make sense. Also the weight spec on Tormeks site might be wrong also.

#3

General Tormek Questions / US-103 & US-105 difference?

Last post by Swemek - Today at 10:51:02 AM

Hi,

I can not not find out what the difference is between the two, all i could find was that the 103 weights 74 grams and the 105 72 grams. I know that 105 is for the larger models.


The reason for asking is i'm considering MB-102 for my T4 and would like to have a second US mainly for MB-102.

Can someone fill me in?


Thanks!

#4

Knife Sharpening / Re: SP-650 use on SJ-250

Last post by tgbto - Today at 09:32:00 AM

I second what John wrote. That being said, I never use the SP-650 on the SJ, as it gets quickly full of blue sludge, and the SJ is so soft that I would be afraid it got way too easily out of square if I don't hold the SP-650 perfectly square to the stone. It could also go out-of-round easily as the SP is very aggressive for the SJ.

Rather, I keep it clean with a rust eraser, and true it from time to time using the diamond tool (and making sure I always go into the stone with the diamond tip, not out of it). The surface might be slightly rough right after truing, but essentially because of artefacts left by the truing tool. The surface will get back to smooth as silk after a few seconds of sharpening.

Another useful tip is the grading procedure demonstrated by Wootz, using a very fine diamond plate and very little pressure (to avoid getting the stone out-of-round).

#5

General Tormek Questions / Re: Product News - KS-123 Knif...

Last post by John Hancock Sr - Today at 04:30:31 AM

Did you get that of original Tormek diamond wheels ?

Yes - I got the DE-250 for $449 but i had to be patient

#6

Knife Sharpening / Re: New angle jig KS-123

Last post by cbwx34 - Today at 02:26:07 AM

Now all we need is one for the SE-77

Rich Colvin has a jig he made for using with the SE-77 that you might find helpful...

Projection Jig for the TTS-100

#7

Knife Sharpening / Re: T4 Blackstone

Last post by John Hancock Sr - Today at 02:09:51 AM

Would any T8 user be willing to sell/send me a worn down T8 Blackstone?

That would definitely work.

#8

Knife Sharpening / Re: SP-650 use on SJ-250

Last post by John Hancock Sr - Today at 02:08:47 AM

No. It works by reducing the size of the exposed particles on the wheel. Since the size of the particles on the SJ are 5,000 grit then that will be the lowest grit the wheel will be. The SP will not "increase" grit size, only decrease.

#9

Knife Sharpening / Re: New angle jig KS-123

Last post by John Hancock Sr - Today at 02:05:01 AM

Now all we need is one for the SE-77

#10

Knife Sharpening / Re: New angle jig KS-123

Last post by John Hancock Sr - Today at 02:01:41 AM

I live in the US and know very little about marketing in Australia.

We are often rorted by importers. Many a time I have bought much cheaper from overseas, including shipping and taxes. Some product lines more than others. Sony for instance is more than three times the $$ price here than in the US for not reason than it is. Take into account exchange rate and the reset that is about 50% over the odds. It is not as bad now that the Australian government clarified the law on parallel imports.

Speaking only about this jig, As per the current exchange rates a US$50 unit is AU75 add import taxes and that is $81.63 not $95. Someone is making an additional 15% profit.

As Charlie Brown used to say, you can't fight city hall