News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

T-8 Water Trough Lifter Sticking

Started by Denned, February 16, 2024, 11:28:56 PM

Previous topic - Next topic

Denned

Has anyone else experienced the water trough sticking when trying to raise the trough on the T-8.  Mine takes a bit of persuasion when lifting especially after reloading the trough.  The black knob is also coming out with the washer and spring.  I seem to have to help it by wiggling the bottom bracket.  Is there something that I should be servicing?  Thanks, Denis

Ken S

Denis,
I suggest you email support (support@tormek.se).
Ken

RichColvin

I'm interested in hearing what you find
---------------------------
Rich Colvin
www.SharpeningHandbook.info - a reference guide for sharpening

You are born weak & frail, and you die weak & frail.  What you do between those is up to you.

cbwx34

Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform.
(or Click HERE to see other calculators available)