News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Sharpen Straighrt Router Bits

Started by Heli_Guy, March 05, 2022, 08:50:30 PM

Previous topic - Next topic

Ken S

I don't know if it would be possible to sharpen the spiral and straight router bits you referenced. I do not think it would be cost effective. The Tormek is not designed for that work. There are specialized machines designed for that work. Unfortunately, you can easily spent several thousand dollars on one of these machines.

I would either buy new bits or deal with a reliable industrial sharpener. If the diameter of the bit is important, your best bet is a new bit.

Sorry.

Ken

Heli_Guy


RichColvin

Plus, theses bits need the helical sides sharpened also.  And there are so many configurations: up, down, & both.
---------------------------
Rich Colvin
www.SharpeningHandbook.info - a reference guide for sharpening

You are born weak & frail, and you die weak & frail.  What you do between those is up to you.