News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

sandpaper vs wetstone

Started by wisewood, February 20, 2018, 04:36:07 PM

Previous topic - Next topic

wisewood

is there a difference between the classification of grit for sandpaper vs waterstones?

cbwx34

Quote from: wisewood on February 20, 2018, 04:36:07 PM
is there a difference between the classification of grit for sandpaper vs waterstones?

Yes.  Here's a brief definition of the different standards used...

QuoteFEPA (Fédération Européenne des Fabricants de Produits Abrasifs) Federation of European Producers of Abrasives. The FEPA distinquishes between grain for sanding paper (FEPA P) and grain for sharpening stones or wheels (FEPA F) The decisive factor for comparison is FEPA F. FEPA P is only used for sanding paper.
JIS (Japanese Industrial Standard) issued by the Japanese Standards Association.
ANSI American National Standards Institute.

... and a quick comparison chart can be found here...

http://www.washingtonmills.no/products/grit-sizes.html

... and a more extensive chart can be found here...

https://docs.google.com/spreadsheets/d/1VaTf3MXuwuvH-QLwOci4f9B9Zhkbuu1wjoSCZIUsR-o/edit#gid=0

If you really want to go down the rabbit hole, read this...

https://www.bladeforums.com/threads/the-grand-unified-grit-chart.856708/

Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform.
(or Click HERE to see other calculators available)