Print Page - Tormek should release a jig like on the T-2 for the T-8 and T-4

Title: Tormek should release a jig like on the T-2 for the T-8 and T-4
Post by: CopperFish on April 16, 2024, 06:31:00 PM

It seems like it should be straight forward to create a knife jig like the T-2 uses that would work on the T-8. This would save a lot of time when sharpening multiple knives in a single session.

I'm sure the T-2 jig isn't out of the box compatible with the T-8 but I'm sure they could design a similar jig that would work.

Title: Re: Tormek should release a jig like on the T-2 for the T-8 and T-4
Post by: Ken S on April 17, 2024, 03:03:00 AM

In this online class, starting around 23:00, Wolfgang explains Tormek's position on this.

https://www.youtube.com/live/zPfckZXyW6Y?si=9wEE7eUQp2p97FZF

Ken

Title: Re: Tormek should release a jig like on the T-2 for the T-8 and T-4
Post by: John Hancock Sr on April 18, 2024, 12:47:48 AM

Hhere is the video starting at the question

https://www.youtube.com/live/zPfckZXyW6Y?si=JH-VJ7j85GTDkCyi&t=1371

Tormek Community Forum

In the Shop => Knife Sharpening => Topic started by: CopperFish on April 16, 2024, 06:31:00 PM