Hi,
New to the forum. I made a Chord-Tangent angle compensation sliding-diagram by GeoGebra. Don't know it's useful or not. I post it on forum for someone who is interesting.
Regards.
Benjamin
https://www.geogebra.org/m/abdqd8dj
d : Grindstone diameter. α : angle. t : blade thickness
-------------------------
Dutchman's Angle Setup Formula Diagram:
https://www.geogebra.org/m/wwuqbvhh
I add Dutchman's Angle Setup formula here. This is his origin model, also my calculator. Present his theory only, can not be apply if you can not find out real Projection & Jig rotate radius.
-------------------------
TTS-100 Type - Jig calculator
https://www.geogebra.org/m/csmvmayb
20230505 Update:
This Diagram show how I find projection (k) & radius (f), not difficult.
https://www.geogebra.org/m/haxutcdv
Add USB base adjustment to Angle Setup Diagram.
https://www.geogebra.org/m/wndeq2gn
aslo post it on Dutchman's Link.
-------------------------
20230510 Update:
Tormek SVM-45 Version Calculator
https://www.geogebra.org/m/uk8cpnq7
Projection is Dutchmen's Projection (6mm different).
-------------------------
20230516 Update:
Tormek SE-77 Calculator
https://www.geogebra.org/m/cdc2mfcc
If you don't use chord angle as second bevel, set thickness t as 0.
-------------------------
20230521 Update:
Add parameter input box of "Blade Angle Setup", "SVM-45" and "SE-77" version. Big thanks to cbwx34 for reviewing, testing & suggestions.
New to the forum. I made a Chord-Tangent angle compensation sliding-diagram by GeoGebra. Don't know it's useful or not. I post it on forum for someone who is interesting.
Regards.
Benjamin
https://www.geogebra.org/m/abdqd8dj
d : Grindstone diameter. α : angle. t : blade thickness
-------------------------
Dutchman's Angle Setup Formula Diagram:
https://www.geogebra.org/m/wwuqbvhh
I add Dutchman's Angle Setup formula here. This is his origin model, also my calculator. Present his theory only, can not be apply if you can not find out real Projection & Jig rotate radius.
-------------------------
TTS-100 Type - Jig calculator
https://www.geogebra.org/m/csmvmayb
20230505 Update:
This Diagram show how I find projection (k) & radius (f), not difficult.
https://www.geogebra.org/m/haxutcdv
Add USB base adjustment to Angle Setup Diagram.
https://www.geogebra.org/m/wndeq2gn
aslo post it on Dutchman's Link.
-------------------------
20230510 Update:
Tormek SVM-45 Version Calculator
https://www.geogebra.org/m/uk8cpnq7
Projection is Dutchmen's Projection (6mm different).
-------------------------
20230516 Update:
Tormek SE-77 Calculator
https://www.geogebra.org/m/cdc2mfcc
If you don't use chord angle as second bevel, set thickness t as 0.
-------------------------
20230521 Update:
Add parameter input box of "Blade Angle Setup", "SVM-45" and "SE-77" version. Big thanks to cbwx34 for reviewing, testing & suggestions.