News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Profile cutter jig SVP 80

Started by giff, August 03, 2010, 02:23:06 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

giff

August 03, 2010, 02:23:06 PM
When sharpening spindle moulder ( shaper ) profile cutter with the SVP 80 jig do you need to sharpen / grind the limiters as well.
Thanks  Giff
Print
Go Up Pages1
User actions