News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

grinding wheel spindle

Started by Steven Krouse, Yesterday at 11:09:23 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Steven Krouse

Yesterday at 11:09:23 PM
Hello, first timer here.
I inherited a model 2000 from my brothers estate.  I noticed the grinding wheel had some lateral movement on the spindle, nut was not tight against the wheel.  I shot The nut with some PB Blaster to free it up, but my problem is I don't see any way to hold the spindle from turning.  Advice greatly appreciated.
SK     

RichColvin

#1
Today at 12:17:29 AM
You should be able to hold the honing wheel
---------------------------
Rich Colvin
www.SharpeningHandbook.info - a reference guide for sharpening

You are born weak & frail, and you die weak & frail.  What you do between those is up to you.
Print
Go Up Pages1
User actions