Small Knife Holder - Sharpen Daggers?

[Thy Will Be Done]

Hi,

Running into problem of not being able to jig sharpen daggers, seems this may work.  Anybody doing this?

[Thy Will Be Done]

I should clarify, meaning large daggers, roughly 6-10" blades. 

[John Hancock Sr]

I do my pocket knives by hand. It takes practice but I get really good results.

[kwakster]

Another option:

https://forum.tormek.com/index.php/topic,5751.msg42186.html#msg42186

[Brock O Lee]

I've used the small knife holder to sharpen knives (even large knives) which do not clamp well on the blade, like this Spyderco with a full flat grind and a distal taper. It works well. Just make sure your blade's edge is perfectly in line with the centerline of the jig, otherwise you'll get a wider bevel on one side.

However very long blades might be challenging because your support is not near the midpoint of the blade.