10 inch honing wheel for T8

[Rossy66]

I did a search on the forum but didn't find any answers so I decided to ask here, I have honestly tried to hone free hand and not with any success, it gets frustrating to sharpen a knife with a great edge and then mess it up on the honing side. I have watched lots of videos bit I still seem to take the sharpness out of the knife but when I hone with the USB and KS-123, my results are perfect and I couldn't be happier. Obviously, I have to keep taking my wheel off to hone most of the knives so I was wondering if anyone has bought and tried a 10 inch honing wheel and the results. I have watched some videos from different YouTubers and I am impressed watching them move from sharpening to honing without removing any wheels.

Thanks

[Ken S]

I have two suggestions:

The first is to use the standard leather honing wheel. use the KS-123 set up jig to set the grinding wheel and the leather honing wheel. Use one support bar in the vertical position for grinding. Use a second support bar in the horizontal position for honing. The KS-123 makes this set up very fast. There is no need to remove a wheel.

The second suggestion is to devote some time to learning how to hone free hand. This is the  way the Tormek instructors work. While this skill may require some time to learn, once learned it will serve you for a lifetime.


Ken

[Rossy66]

Thanks Ken, that is pretty much my set up but on most knives 8" or longer, I hit the DF 250 as I move to the tip. I will include some photos when I get off work.

Thanks