News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Drive wheel not engaging.

Started by potentpotables, Today at 02:32:03 AM

Previous topic - Next topic

potentpotables

I have a Tormek T8 that is fairly new.

It was working when I packed it up to move houses. It was not working when I opened the package again.

Nothing seems to be damaged, but the friction wheel will no longer engage with the drive wheel. They are very close to each other but do not make contact.

Any help would be greatly appreciated.

Ken S

Welcome to the forum, Dillon.

Your problem is generally corrected by removing the leather honing wheel and roughing up the rubber drive wheel a bit with abrasive paper to create more friction. This is covered in the handbook and several online classes. The good part is that I don't recall anyone needing to do it more than once.

Please let us know either way, whether it works or not.

Ken

John Hancock Sr

Remove the drive wheel and make sue that the motor swings freely on its mount. Have a look inside at the motor mount pivot point. It sounds like something has been dislodged or even broken.

Ken S

This may be a good time to remind everyone to register their Tormek machines on the Tormek website. The service is free, and extends the regular warranty from five years by another three years. Registration is simple and well explained on the website. registration also allows access to the latest online edition of the handbook. I have found it very to have the handbook loaded onto my ipad. The online handbook is available in sixteen languages at no charge to registered owners.

Don't overlook Tormek support (support@tormek.se). Things which we users might possible encounter once, support handles on a daily basis.

Ken