Applying Diamond paste on rock hard felt wheel

[TireguyfromMA]

I purchased a 10" rock hard felt wheel (0.80gm/cm3) for my T8.  Applied 1 micron diamond paste (more like a slurry) to the surface for honing. A couple of questions I have are, how often should I reapply the paste and is alcohol based diamond spray better to use than a slurry?  The diamond slurry stuff came in a small 1oz spray bottle.  I couldn't find where to buy the alcohol based spray. 

[Ken S]

Here is a link to an alcohol based diamond spray supplier:

https://www.chefknivestogo.com/ri1midisp2oz.html

Ken

[3D Anvil]

Here is a link to an alcohol based diamond spray supplier:

https://www.chefknivestogo.com/ri1midisp2oz.html

Ken

I'll be darned!  I've had a bottle of that for ages and didn't realize it was alcohol based until you mentioned it.

[TireguyfromMA]

Thank you both!  I'm going to place a order on Tuesday morning.   About how often would you re-apply this spray?  My wife says "diamonds are forever".

[WimSpi]

Thank you both!  I'm going to place a order on Tuesday morning.   About how often would you re-apply this spray?  My wife says "diamonds are forever".

My wife says that too, but then she says, "but there can always be one more"

[TireguyfromMA]

Here is a link to an alcohol based diamond spray supplier:

https://www.chefknivestogo.com/ri1midisp2oz.html

Ken

At the :50 second point in the website video the guy mentions that this spray is water based