News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

T2 or T4/8?

Started by Ken S, July 13, 2022, 01:15:14 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Ken S

July 13, 2022, 01:15:14 AM
When Tormek introduced the T2 several years ago, it was introduced as a specialty machine for chefs and restaurants. It was never intended to be a general purpose sharpening machine. The T2 generated a lot of interest among the knife sharpening community, even though Tormek has always stated that sharpeners would be better served with a T4 or T8.

Since that time, Tormek has redesigned the T2 knife holder and introduced the DE-200 1200 grit diamond wheel. Tormek now has diamond wheels available for the T2 (and T4) in the full 360, 600, and 1200), the same range as the the D-250 series. While there is no 4000 grit stone for the T2, the gap between the T2 and the T4 and T4 and T8 seems smaller. I hope Tormek will have another online class next season showcasing the new T2 features.

Ken
Print
Go Up Pages1
User actions