News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

the original, still must have, forum designed knife jig

Started by Ken S, June 06, 2022, 02:09:57 PM

Previous topic - Next topic

Ken S

Most of us were probably not on the forum when Herman designed and made this jig. In my opinion, it remains on the "must have" short list for serious knife sharpeners. The advantage of the narrower "diving board" is that it allows both bevels to be ground full length without repositioning the jig. Here is Herman's video link:

Well done, Herman!

https://youtu.be/AcWAkQmoU8c

Ken

cbwx34

Quote from: Ken S on June 06, 2022, 02:09:57 PM
Most of us were probably not on the forum when Herman designed and made this jig. In my opinion, it remains on the "must have" short list for serious knife sharpeners. The advantage of the narrower "diving board" is that it allows both bevels to be ground full length without repositioning the jig. Here is Herman's video link:

Well done, Herman!

https://youtu.be/AcWAkQmoU8c

Ken

GKC's thread has a pretty good summary of the "Platform Jig"...

https://forum.tormek.com/index.php?topic=3818.0
Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform.
(or Click HERE to see other calculators available)