News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

video comparison testing penetrating oils

Started by Ken S, May 31, 2022, 01:46:31 PM

Previous topic - Next topic

Ken S

We occasionally have posts about pre 2006 shafts rusting solid with the grinding wheel and nut. The standard remedy is patience and penetrating oil. Here is a link to a video comparison testing various penetrating oils. Patience is user provided.

https://youtu.be/xUEob2oAKVs

Ken

cbwx34

You might have bored the forum to death.   :D :D :D
Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform.
(or Click HERE to see other calculators available)

tgbto

Well actually this kind of video is like the utlimate clickbait for me... I foudn myself watching not only this one, but also the one with rust removers and all...

BeSharp

Todd at Project Farm produces some of the best tool review videos on YouTube. That's why he has such a high subscribed and viewership numbers. If you watch it, you'll find he doesn't waste time, and speeds up the video whenever he can.

He also buys all the products he reviews; he is not sponsored by any manufacturer.

Highly recommended.

(Very impressive)!

Ken S

Quote from: cbwx34 on June 01, 2022, 12:22:17 AM
You might have bored the forum to death.   :D :D :D

CB,
Apparently not everyone on the forum was bored to death......
Ken

cbwx34

Quote from: Ken S on June 02, 2022, 12:26:57 AM
Quote from: cbwx34 on June 01, 2022, 12:22:17 AM
You might have bored the forum to death.   :D :D :D

CB,
Apparently not everyone on the forum was bored to death......
Ken

Ok... .0678% liked it.  (within a reasonable margin of error...)    ;D ;D ;D
Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform.
(or Click HERE to see other calculators available)

Ken S


John_B

I don't come across so many rusty bolts these days since I stopped doing car restoration.
Sharpen the knife blade
Hone edge until perfection
Cut with joy and ease

cbwx34

Quote from: Ken S on June 02, 2022, 03:50:35 AM
My fan rating is improving.  :)

I'm pretty sure that's at 100%...

+- 2% haha  :)
Knife Sharpening Angle Calculator:
Calcapp Calculator-works on any platform.
(or Click HERE to see other calculators available)