Interesting Tormek Observation

[RichColvin]

I was updating my quick reference on the Tormek part numbers.  I changed the colors so that replaced jigs are shown in black vs. the new ones in blue.  It quickly showed me how few jigs have had to be replaced -- clear evidence to me of how much engineering and design go into their design. 

Thank you to the Tormek engineers!


Tormek Jig numbers
* DBS-22 Drill Bit Sharpening Attachment
* RBS-140 Round Blade Sharpening Attachment
* SE-76 Square Edge Jig
* SE-77 Square Edge Jig
* SVA-170 Axe Jig
* SVD-110 Tool Rest
* SVD-180 Gouge Jig (old — replaced by SVD-185)
* SVD-185 Gouge Jig (old — replaced by SVD-186)
* SVD-186 Gouge Jig (old — replaced by SVD-186R)
* SVD-186R Gouge Jig
* SVD-110 Tool Rest
* SVH-60 Straight Edge Jig (old — replaced by SE-77)
* SVH-320 Planer Blade Attachment
* SVM-00 Small Knife Jig
* SVM-45 Knife Jig
* SVM-100 Long Knife Jig (old — replaced by SVM-140)
* SVM-140 Long Knife Jig
* SVP-80 Moulding Knife Attachment
* SVS-32 Short Tool Jig (old — replaced by SVS-38)
* SVS-38 Short Tool Jig
* SVS-50 Multi-Jig
* SVX-150 Scissors Jig


Tormek Accessory numbers
* ACC-150 Anti-Corrosion Concentrate
* ADV-50D Diamond Truing Tool (old — replaced by TT-50)
* ADV-D Exchange Diamond Bit for TT-50
* AWT-250 Advanced Water Trough
* BGM-100 Bench Grinder Mounting Set
* CW-220 Composite Honing Wheel
* EM-15 Edge Marker
* HB-10 Tormek Handbook
* HTK-00 Storage Tray for Hand Tool Kit
* HTK-806 Hand Tool Kit
* LA-120 Profiled Leather Honing Wheels
* LA-122 profiled "discs" (leather honing wheels)
* LA-124 narrow profiled "discs" (leather honing wheels)
* LA-145 Leather Honing Wheel
* LA-220 Leather Honing Wheel
* MB-100 Multi-Base
* MH-380 Machine Cover
* MSK-250 / MSK-200 Stainless Steel Shaft
* OWC-1 Tormek Converter
* PA-70 Honing Compound
* RB-180 Rotating Base
* RM-533 Rubber Work Mat
* SP-650 Stone Grader
* SVD-005 Upgrade kit for SVD-180
* T8-00 Storage Tray for Tormek T-8 Accessaries
* TC-800 Tormek Case
* TNT-00 Storage Tray for Woodturner's Kit
* TNT-300 Woodturner's Instruction Box
* TNT-808 Woodturner's kit
* TS-740 Sharpening Station
* TT-50 Truing Tool
* TTS-100 turning tool setter
* US-103 universal support for T-3 & T-4
* US-105 universal support for T-7 & T-8
* US-430 Universal Support Extended
* WM-200 AngleMaster
* WT-200 Water Trough (old — replaced by AWT-250)
* XB-100 Support Base (plate and knobs only)


Tormek Stones
* DC-200  Diamond Coarse
* DC-250  Diamond Coarse
* DF-200  Diamond Fine
* DF-250  Diamond Fine
* DE-200  Diamond Extra-fine
* DE-250  Diamond Extra-fine

* DWC-200 Diamond Wheel Coarse

* SB-250 Blackstone Silicon Grindstone
* SG-200 Original Grindstone
* SG-250 Original Grindstone
* SJ-200 Japanese Water Stone
* SJ-250 Japanese Water Stone

[cbwx34]

A good reference! 

[Naf]

Rich,

When you say replaced you mean you had replace, I assume. Tormek newbie here!

Regardless (that not anything I worried about this point) , I wanted say thank you so much for this! (I not remember a single one of those numbers yet.

Also, thank you SO much for inclusionasterisks.  (I intend put this all in table with more info, even if just for my own use, though would certainly share, once finished, which the asterisks make quite easily possible. ) You may already be heading that direction. I plan do most that work in Notepad... probably take couple minutes (without additional information adding, of course)

[Naf]

Finally came back to this, again, quickly realize I had gotten colors reversed and notsee stuff in parentheses on right, which would have prevented first statement. Ugh.