T 2000

[capt rich]

 Bought a used unit, it is older doesn't have horizontal bracket. Tool bar is not threaded. Where is the serial number, if there is one.

[RichColvin]

Rich,


The older units did not have threaded universal supports.  I replaced my bar with the newer one (US-105).


Also, you can order the horizontal support holder as a add-on for your machine.  P/n XB-100


Finally, I swapped out my drive shaft for the newer one (MSK-250).


Kind regards,
Rich

[Ken S]

Rich,
Be sure to register your Tormek with Tormek (on the www.tormek.com website) I don't think your machine has a serial number. No warranty remains, however, once you register you have access to the latest online version of the handbook. I have downloaded this on my ipad and refer to it frequently. The handbook has not changed much over the years.
Ken

[capt rich]

 Thanks everyone, registered my T2000 [no 3's] and found all kinds of good stuff in support. Making a list of stuff I have to order to get the results I want in the end. Definitly the book...  Thanks again.