News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Notching Tool Handles

Started by RichColvin, January 04, 2021, 01:10:48 AM

Previous topic - Next topic

RichColvin

David Reed Smith (www.DavidReedSmith.com) has a number of tools he has made for wood turning, and shows how to sharpen them also.  Some of them, like the pyramid point tool and the mini cove tool are not easy to repeatable sharpen using standard Tormek jigs.

David's recommendation is to cut a notch in the tool's handle so that the handle neatly fits onto the universal support bar.  Two examples for this are:
The tool's notch can be put onto the USB, and the angle set using the WM-200 and be back into business soon.  I love simple solutions, and this is a great idea for these tools.
---------------------------
Rich Colvin
www.SharpeningHandbook.info - a reference guide for sharpening

You are born weak & frail, and you die weak & frail.  What you do between those is up to you.

Ken S

Interesting articles, Rich. Thanks for posting them. The Tormek seems ideally suited for these tools. His set ups are clever, as these tools are smaller than the typical size.
More good Tormek ideas from thinking outside the box.

Ken