News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

another thought on softwood chisel bevels

Started by Ken S, July 29, 2021, 04:20:43 PM

Previous topic - Next topic

Ken S

Rob Cosman presents another thought for softwood chisel bevel angles. In the video, he does not use a Tormek; however, this could be done with a Tormek without the overheating concern.
https://youtu.be/-_QnPh347WA
Ken