News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

Tormek Supergrind 2000 (square pre-2001 model) Restoration

Started by Ornias, April 21, 2020, 09:06:57 PM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

John Hancock Sr

#15
April 03, 2025, 11:10:31 AM
Quote from: andicugino on April 03, 2025, 08:00:01 AMetched, drilled, and soldered the circuit boards ourselves. We also sawed, drilled, and filed the housing. We even screen-printed the front panel

That takes me back. You don't get much of that these days. It did look like a custom job from the original picture :)
Print
Go Up Pages 1 2
User actions