News:

Welcome to the Tormek Community. If you previously registered for the discussion board but had not made any posts, your membership may have been purged. Secure your membership in this community by joining in the conversations.
www.tormek.com

Main Menu

SVS 50 questions

Started by rtaylor80127, September 17, 2019, 06:10:29 PM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions

AKMike

#15
October 01, 2019, 11:19:21 PM Last Edit: October 01, 2019, 11:23:22 PM by AKMike
I was able to find my old SVS-50 closed seat. It is 10mm longer than the newer seats, so reduce your projection by 10mm and you should get the right bevel angle. There is some parallax error in the photo - the aluminum and zinc seats on the right are the same size.

Mike
Print
Go Up Pages 1 2
User actions